xxx_pureKNX-Line10

pureKNX-Line10

  • complete system with finished visualization
  • glass touchscreen
  • 4 mounting options: flush-mounted, flush-mounted, surface-mounted, conference table housing
10 inch KNX touch panel with ETS visualization
pureKNX-Line10 in easy smart home mode
10 inch KNX touch panel with ETS visualization
pureKNX-Line10 in full operation mode
Touch panel for building automation, flush installation
By lightly pressure the touch panel slides into the built-in box. Integrates flush and harmoniously into the wall
Touch panel for multi-touch building automation
Touch panel for building automation, flush installation
The touch panel is mounted on the support in tci EPG with 4 screws
Touch panel for building automation, flush installation
pureKNX-Line10 in EPG: robust tci flush mount housing with powder-coated surface. Laterally-mounted slots offer flexibility in wall installation, and there are several ways to insert the cables on each side. [Figure luna10-PC]
Touch panel for building automation in a wall-mounted housing
pureKNX-Line10 in APG on concrete wall
Touch panel for building automation in a wall-mounted housing
pureKNX-Line10 in APG on marble wall
Touch panel for building automation in a wall-mounted housing
pureKNX-Line10 in APG
Touch panel for building automation in a flush-mounted housing
pureKNX-Line10 in EPG
Mobile touch panel for conference table or reception
pureKNX-Line10 in TKG for e.g. conference table
Touch panel for building automation in a flush-mounted housing
pureKNX-Line10 im UPG

This 10 inch touchpanel has the same functions as pureKNX-Base7 but fulfils a high-quality design due to glass touch. The flat glass front is visually appealing and is easy to operate.

pureKNX-Line07 can be installed into a built-in box (UPG) or flush into the wall (EPG). Particularly the flush mounted version fulfills the esthetic requirements of modern architecture. Another mounting possibility is surface mounting (APG), which is especially suitable for walls, that shouldn’t be renovated, for example exposed concrete or historical timbered houses. The desktop unit KTG is the perfect equipment for conference rooms to control the AV-technology or the lighting as well as for receptions or for entrance areas.

Request now Download Datasheet

Variants

Imagebild-10Zoll-EPG2

Installation into  EPG

 Imagebild-10Zoll-UPG

Installation into UPG

 Imagebild-10Zoll-APG_neutral

Installation into APG

 Imagebild-10Zoll-KTG

Installation into KTG

These pictures show the luna10 in various installation situations

Product information at a glance

Technical data

  • 10" touch panel with continuous glass surface, 1024x600
  • ethernet 10/100
  • PoE 
  • working temperature: 0 up to 35°C
  • storage temperature: -20 up to 60°C
  • relative humidity: 10 up to 80%, not condensing
  • power supply:  24 VDC and PoE  
    IEEE Std 802.3af (Class 0)

see source code

Order info

pureKNX-Line10

10" touch panel with continuous glass surface, 1024x600, KNX-TP interface, ethernet 10/100, PoE (class 0)
with pureKNX server software and Web-based Device Management

Additional equipment

 

Mounting

EPG - Built-in box for flush mounting (including HMK) ​​​​​​
UPG - Built-in box (optionally with HMK)
APG -  Housing for on wall installation
KTG-KNX - Housing for conference table. Interface IP (RJ45) and KNX-TP (via Cat cable, adapter included), power supply only via PoE (IEEE 802.3af), KNX TP (via Cat cable, adapter included)
MONT(R2) - Mounting support set with straight plates for plastering
HMK - Cavity wall mounting kit consisting of bracket and installation template

NT-HUT-24VDC-100W

External top hat rail power supply, primary 85-264 VAC, secondary 24 VDC, 100W, 4DU

Power consumption

Operating status

P in W

Operate under full load, display max. brightness

10,8

Operate under Idle-Loop, display max. brightness

6,5

Operate, display off

2,4

Shutdown

0,5

Technical drawing

Downloads

Videos